DESCRIPTION: EasyFlo™ Liquid Plastics are excellent for casting decorative objects, production parts, tools, models, duplicate masters and more. EasyFlo systems consist of two parts (A and B) that, after mixing, quickly cure to tough polyurethane plastics. Since Parts A and B are super-low viscosity liquids, they are easy to mix, provide excellent detail penetration, and make bubble-free castings without vacuum degassing or pressure casting techniques. Rapid demould times make EasyFlo ideal for high-volume, fast-cast applications.
EasyFlo 60 pours like water, so making bubble free parts is easy and fast.
• Rapid demould
• Reproduces finest detail
• Tough, non-brittle formula
• Excellent bubble release
• Reduced need for pressure or vacuum
|EasyFlo 60 ||Unit |
|Mix Ratio By Volume ||1A : 1B |
|Pot Life ||2 - 2.5 mins |
|Demould Time ||15 - 30 mins |
|Total Cure Time ||7 Days |
|Shore D Hardness ||D65 |
|Cure Colour ||White |
If you plan to paint your cast part, it would be recommended to use the SG2000 & SG2000L polyurethane system's over polytek polyurethanes.