The Colour Shown in the pictures above should be used as a guide only due to the varying degrees in monitor colour management, they have been mixed with Easyflo-60 to give an opaque cast, to achieve the correct colour saturation we always recommend to cast a small trial object/sample to make sure the pigment is mixed at the correct ratio, pigments can be mixed to achieve various colours.
Liquid dye for colouring polyurethane liquid rubber and plastic products, Polytek pigments are very concentrated, a little goes a long way.
Mix Ratio By Weight:
Black - 0.5%
Blue - 0.5%
Green - 0.5%
Red - 0.5%
Yellow - 0.5%
Brown - 1%
White - 2%
Please note while these pigments are compatible with the Easyflo range for best results we recommend using the pigments with the Easyflo Clear, this will give you a transparent look to the resin, ideal for embedding objects that still require the see through look with a slight colouring.
If you require an opaque cast we recommend using pigments with Easyflo 60, 95 & 120, although the colour density and shade will be diluted by the white curing colour of the easyflo product, for example black pigment may produce a grey cast.