DESCRIPTION: EasyFlo™ Liquid Plastics are excellent for casting decorative objects, production parts, tools, models, duplicate masters and more. EasyFlo systems consist of two parts (A and B) that, after mixing, quickly cure to tough polyurethane plastics. Since Parts A and B are super-low viscosity liquids, they are easy to mix, provide excellent detail penetration, and make bubble-free castings without vacuum degassing or pressure casting techniques. Rapid demould times make EasyFlo ideal for high-volume, fast-cast applications.
EasyFlo 120 pours like water, so making bubble free parts is easy and fast.
EasyFlo 120 is best for rotocasting or slush casting to create hollow parts. This is a tough plastic - hollow parts are nearly unbreakable!
•Reproduces finest detail
•Tough, non-brittle formula
•Excellent bubble release
•Reduced need for pressure or vacuum
|EasyFlo 120 ||Unit |
|Mix Ratio By Volume ||1A : 1B |
|Potlife ||2 - 2.5 mins |
|Demould ||15 - 30 mins |
|Shore D Hardness ||D65 |
|Colour ||White |
The SG2000 & SG2000's polyurethane system's are recommended over polytek polyurethanes if you plan to paint your casted part.