PlatSil Gel series is an advanced prosthetic grade silicone rubber. It is a two-part platinum silicone system with a mix ratio of 1:1. It also has a very fast set and de-mould time. PlatSil Gel Silicone Rubbers are the industry standard in the special effects industry for creating life-like theatrical prosthetic appliances for film, television and theatre to fabricate realistic body parts such as wounds, masks, scars, prosthetic appliances, life casting and prop making.
- Prosthetic Grade
- Fast Set & Demould Time
- Creates life like prosthetic's
- Exceptional for wounds, scars & masks
|PlatSil Gel OO ||Unit |
|Cured Colour ||Milky White |
|Mix Ratio ||1A : 1B |
|Pot Life 200g @ 20°c ||6mins |
|Demould Setting Time ||30 - 60 Mins |
|Shore oo ||oo30 |
|Mixed Viscosity (cP) ||22000 |
|Specific Gravity @ 23°C ||1.1 |
|Shrinkage Upon Cure ||Nil |
Before use, be sure that Parts A and B are at room temperature and tools and moulds or models are ready to go. Surfaces and air temperature should be above 60°F during application and for the entire curing period. Use plastic mixing vessels and spatulas to avoid introducing moisture (i.e.., with paper or wood tools).
Measure equal weights of part A and part B into a mixing container such as a polyethylene pail. Mix immediately, thoroughly scraping sides and bottom for one minute. Once the containers of Parts A and B are opened, they should be used or resealed tightly as atmospheric moisture contamination.