Not suitable for permanent immersion.
|Temp ||Touch Dry ||Recoat (min/max) ||Thinners / Tool Cleaner ||Coverage |
|10°c ||6 hrs ||16 hrs -10 Days ||Thinners No: 1 (Brush) ||12m2/ltr |
|20°c ||3 hrs ||8 hrs - 5 Days ||Thinners No: 3 (Spray) ||12m2/ltr |
Preparation & Application :
Ensure all surfaces are clean, oil free and dry.
Previously Coated Surface
Abrade to remove any loose matter and provide a suitable key. Wash surface with fresh water and allow to dry. Apply 2 coats of Bilge & Locker
Previously Uncoated Surface
Prepare and prime surface with appropriate primer as per specification*. Once primed apply 2 coats of Bilge & Locker thinned 5-10% followed by 2-3 coats undiluted.
*Apply one coat of Bilge & Locker thinned with 20% followed by a second coat of Bilge & Locker thinned to 5-10%
For further information on technical and safety information please refer to files provided in the technical and safety tab above
*The colour's shown should be used as a guide only due to the varying degrees in monitor colour management