Red Tooling GCT/5268H Brushing Gelcoat - 1kg

Intended Use
Designed to be used for the manufacture of GRP tools/moulds. 
 
Characteristics
Suitable for application by brush or roller to give an even film, free from air.  Our tooling gelcoat yields a film that is hard and tough with good flexibility. 
 
Application
Formulated to cure at temperatures > 16°C and needs only the addition of catalyst prior to use.  Medium activity methylethyl ketone peroxide (MEKP) is the recommended catalyst at an addition level of 2% by weight to ensure sufficient cure at room temperature.  For best results it should be applied in one layer of 375-500 pms (microns)/0.375-0.5mm or 460-610g per square metre.  

Appearance (GCT/5268H)
Red In Colour
 
Liquid properties
Pseudoplastic and thixotropic
 
Gel time
100gm gelcoat, 2% MEKP @ 25°C < 15 minutes
  
Barcol Hardness
40 - 50

Please note - Polyester gelcoats are best used within six months from date of purchase.