PlatSil Gel 10 Special Effects Prosthetic Skin Safe Silicone Rubber

Before use, be sure that Parts A and B are at room temperature and tools and moulds or models are ready to go. Surfaces and air temperature should be above 60°F during application and for the entire curing period. Use plastic mixing vessels and spatulas to avoid introducing moisture (i.e.., with paper or wood tools).
Measure equal weights of part A and part B into a mixing container such as a polyethylene pail. Mix immediately, thoroughly scraping sides and bottom for one minute. Once the containers of Parts A and B are opened, they should be used or resealed tightly as atmospheric moisture contamination.