CALL US NOW:028 90 861992
MON-THU 8:30AM - 5:00PM , FRI 8:30AM - 3:30PM

Hempel Dura-Satin Varnish 750ml

(Inc. 20% VAT)
(£16.67 Exc. VAT)
Earn 20 Loyalty Points
13 in stock
Quick Link Code

*Image(s) For Illustration Purpose Only

Hempel's Dura-Satin Varnish is a quick-drying, silk gloss urethane alkyd varnish. Resistant to wear and abrasion within hours of application. Good resistance to seawater, sunlight and adverse weather conditions.

Minimum Application Temperature : 5°c

Application Methods :

Temp Touch Dry Recoat (min/max) Thinners / Tool Cleaner Coverage
10°c 6 hrs 8 hrs - 4 days Thinners No 1 19.2 m2/ltr
20°c 3 hrs 4 hrs - 2 days   19.2 m2/ltr

Surface Preparation

Preparation: Always ensure all surfaces are clean, oil free and dry. Clean the surface and remove possible oil and grease with a suitable detergent and sand with dry abrasive paper. It is recommended to apply a suitable wood treatment to new wood before coating.

New wood: Sand and remove all dust. Saturate the dry, clean surface with suitable wood treatment, allow to dry. Plywood: Sand and remove all dust. Seal the dry clean surface with suitable wood sealer. Teak: Degrease the surface thoroughly with a suitable degreaser. Previously damaged varnished wood: Wood treatment may be necessary. Previously varnished wood: Abrade, clean and dry the surface.

For further information on technical and safety information please refer to files provided in the technical and safety tab above

Technical & Safety Sheets

Be the first to Write a Review for this item!