Crystic 2-446PA Unpigmented (Clear) General Purpose Laminating Polyester Resin (Lloyd's approved, Low styrene emission)
Pre-accelerated, thixotropic viscosity polyester resin with low styrene emission. Its rapid wet-out, low exotherm and fast hardening characteristics make it ideal for spray applications which require a fast mould turn round. This reduction in styrene emission is achieved with no loss of intermalinar adhesion.
Approved by Det-Norske Veritas and Lloyd's Register of Shipping for use in construction of craft under their survey.
Crystic 2-446pa should be allowed to attain workshop temperatures (18°c - 20°c) before use. They need only the addition of a catalyst to start the curing reaction. A colour change mechanism is incorporated into Crystic 2-446pa to indicate the presence of catalyst. After catalyst addition the resin will change from a blue, to green/blue. Catalyst should be added at 1% or 2% into the resin.
| Parts of Catalyst M (or Butanox M 50) to 100 parts of Crystic 2-446PA | 1.0 | 2.0 |
| Pot Life in Minutes at 15°C | 62 | 41 |
| Pot Life in Minutes at 20°C | 39 | 29 |
| Pot Life in Minutes at 25°C | 25 | 20 |
Please note - Polyester resins are best used within six months from date of purchase.
*Although this product is described as Clear, it is in fact translucent blue in colour, The term 'Clear' is a grp industry standard as it is an non pigmented material, This does not create a completely translucent or water clear effect.*
Polyester resins should only be used in a well ventilated area, correct PPE and breathing apparatus should be worn and safety information read and followed. Polyester based resins will have a very potent chemical smell before, during and after the curing process, these resins are to be used within industrial environments and are not suitable for use within a house / home. Please ensure you have read all safety information available before using.
GBP
EUR
