Polycraft ClearTop 35 is a fast curing colourless epoxy resin designed especially for use in variety of applications such as Artwork, Bar tops, Counter tops, Furniture, Jewellery, Photos and other decorative and artistic projects that require a strong, durable coating. ClearTop 35 is low in colour and high in UV resistance. ClearTop 35 has excellent water resistance, chemical resistance, mechanical properties with excellent adhesion to a variety of substrates.
- Clear and UV Resistant
- Cast from 5mm to 35mm thickness
- Fast curing
- Low viscosity, easy to apply
- Low tendency to yellow on exposure to UV
- Excellent mechanical properties
- Excellent chemical and water resistance
- Excellent adhesion
Important information regarding usage for bar tops, counter tops and flooring.
While this resin has been manufactured to resist scratching and resistance to marking from heat sources we must stress this resin will still mark if sharp items are moved across the surface or hot items are placed on the surface. It is essential that place mats are used for any hot items that are being placed on the surface. Over time it is inevitable that scratches will appear on the surface and while small marks may be removed using polishing compounds, deep scratches will be difficult to repair. We are aware that many of our customers use this resin for creating kitchen worktops however we advise caution when using for this purpose due to the range of hot and sharp items that will be placed on the surface.
If using this resin as a floor covering be aware that the floor will scratch over time, any small stones or chippings on the soles of shoes can cause considerable damage, due to the highly polished cured finish this floor surface will also become extremely slippery when wet.
As with all casting products, we stress that customers should purchase a small amount to perform initial tests to ensure suitability for their project and requirements.
|Mix Ratio|| Weight ||100 : 45|
|Hardness|| ShoreD||80 - 85|
|Viscosity (25°C)||mPa.s||350 – 650|
|Density (25°C)||g/cm3||1.05 – 1.10|
|Pot life (200g, 25°C)||Hours||> 8 hours|
|Cure Time (200g, 25°C)||Hours||48|
|Full Cure (25°C)||Days||7|
|Recommended Casting Thickness||mm||5 - 35|
Epoxy pigments are the recommended system to colour this resin however the polyester range of pigments will also work.
Polyester Pigments - Standard Range
Polyester Pigments - Metallic Range
Polyester Pigment - Transparent Range
Please read the Technical and Safety Datasheets prior to use.
We recommend small scale testing to ensure compatibility before using at full scale.