A firm Mold Release Paste Waxbased on the highest quality Refined Carnauba Wax blended withother synthetic high temperature ingredients and petroleum distillates. Ease of application and removal. May be allowed to stand at length & still polish wipe easily.
Honey Wax is a unique, high gloss paste wax for use by the reinforced fibreglass molder as a mold release agent. It is compounded with the purest grade carnauba wax, plus special binders and spreading agents. Honey Wax creates a durable wax surface that remains intact for multiple pulls. Honey Wax reduces man hours due to its exceptional ease of application and buffing.
A true, hard gloss, paste wax formulated with synthetic waxes and high heat resins for the effective release of most plastic parts through numerous cycles. Buffs to an ultra high gloss for easy separations. An excellent release between fiberglass/fiberglass separations as well as fiberglass/foam separations.
This is a universal release wax that will offer excellent release from a wide range of rigid mould compounds including plaster, Jesmonite, GRP, metal, wood, and glass. It can also be used on production equipment such as scales and casting tables to assist in cleaning. Please note that some porous surfaces such as plaster and timber may need to be sealed before release wax is applied, and trials should be carried out to ensure that the product is suitable.
Release Agent for Polyester, Epoxy & Polyurethane. For use on silicone rubbers when seperation is required. AFH dries rapidly, has low mould build up and provides easy release for resins from moulds. Particularly useful in moulds when fine detail is important.
MACWAX is a blend of waxes dispersed in rapid drying solvents and packed in aerosol form. This product does not contain CFCs, 111-trichloroethane or any other kind of halogenated solvent. MACWAX is suitable for use with many casting materials and a variety of mould types. Typical casting materials are polyurethane epoxy acrylic and polyester. MACWAX is also used extensively for moulding flexible semi-rigid and rigid polyurethane foams.
Epoxy Parfilm is recommended for epoxy resins. Its highly effective, micro-thin, film-forming application offers a better release than polyvinyl alcohol or wax. Its micro-thin film maintains the fidelity of the cast piece and affords better surface reproduction and finish.
Petrogel is a solvent-based wax release agent, which has been specially formulated to provide release from a wide range of moulds and moulding materials. Petrogel provides a high quality and reliable release from moulds made from metal, epoxy, polyurethane, GRP (polyester) vacuum-formed plastics, silicones, wood, plaster and MDF. On porous surfaces it acts as a surface sealer; it works well due tom its unusually high solids concentration.
PVA Release Agents are a liquid solution of polyvinyl alcohol resin in a mixture of water and industrial methylated spirits sometimes including small quantities of dye and/or matting agent dependent upon the grade.
PVA Release Agents can be applied over wax polish but the wax polish must be silicone free. Soluble in water and therefore can be washed off moulds and mouldings with water even when dry. PVA Release Agents are a liquid solution of polyvinyl alcohol resin in a mixture of water and industrial methylated spirits sometimes including small quantities of dye and/or matting agent dependent upon the grade.
Designed as a mould release/parting agent for use when fabricating mouldings in polyester gelcoat and layup resins in GRP construction. They have been developed to give best results if spray applied but glossy versions can also be applied by sponge or soft brush. PVA Release Agents can be applied over wax polish but the wax polish must be silicone free
Concrete Release Agent is a chemical release agent specially formulated to give easy release of plastic and thermoplastic mould liners providing high quality surface finishes to concrete. i.e. Polypropylene, ABS, Polyurethane, some latex and rubber moulds etc.