At MB Fibreglass we specialise in a wide range of high-performance liquid plastics suitable for a variety of modelling and casting projects.
Find professional casting resins. Find tough, easy-to-mix liquid plastics that are perfect for casting decorative objects, tools and models, alongside professional polyurethane casting systems suited to badge doming and clear casting applications. Make the right choice, whatever your casting project. Find out more information, focus your search and discover the various resin characteristics across our entire range of liquid plastics in our Liquid Plastics Comparison Chart (the chart is also available to download in PDF format).
Think you’ve found the right liquid plastic for you application? Be sure to read the Technical and Safety sheets to assess the product’s suitability and ensure safe and proper usage. Our knowledgeable team is on hand, ready to offer additional help or advice relating to any moulding or casting project – so don’t hesitate to get in touch.
Polycraft K2 Polyurethane Casting Resin, nearly odourless two-component polyurethane casting resin, with a low shrinkage ratio, short demould time and good ability for painting, which is designed for high strength applications, For castings up to 25mm thick that require quick demould times. Excellent properties. Consisting of two parts A & B, after mixing cures to a very tough polyurethane plastic.
Axson F32 is specifically design to be used for casting fragile parts without the risk of breakage, it is a popular choice for casting patterns, moulds, thin prototypes and scale models and toys. This resin is especially popular with the scale military modeler casting environments. For capturing fine detail this resin is very low viscosity, it have a pot life of 2 minutes and a demould time of 20 - 25 minutes with a full cure of around 72 hours.
Axson F38 offers excellent impact resistance, is very low viscosity with a thermoplastic aspect. With a low shrinkage ratio, short demould time and good ability for painting, this resin is widely used within the small prototype and scale model industry. The F38 has a pot life of 2 minutes and a demould time of 20 - 25 minutes with a full cure of around 72 hours.
EasyFlo 120 pours like water, so making bubble free parts is easy and fast (2-2.5-min working time, 15-30-min demold).EasyFlo 120 is best for rotocasting or slush casting to create hollow parts. This is a tough plastic - hollow parts are nearly unbreakable!
EasyFlo Clear cures to a pale amber color and is often used with PolyColors to make transparent, colored castings. Also, itís excellent in applications using fillers intended for visual appeal (e.g., bronze).
Odourless twin component polyurethane which is designed for thin sections, or castings up to 20mm thick that require quick demould times. Ideal for use in roto / slush casting, This is a very tough plastic Polycraft FC3000 consists of two parts A & B, after mixing cures to a tough polyurethane plastic.
High quailty, twin component, polyurethane casting system , economical price makes this resin an ideal choice for a backfill resin, when a more premium resin has been used for the first coat or shell. Suitable for projects that require high volumes of fillers to be added to resin.
Polycraft FC-6600 Water Clear Slow Set cures water clear, it is ideal for rapid prototyping , embedding or casting without a vacuum. Due to the long pot life it is much more suited to deeper casting than the FC-6620-C. This resin has a recommended casting thickness of between 10 - 50 mm , casting thicker may result in bubbles in cast. UV stable.
Polycraft FC-6620-C cures water clear, it is ideal for rapid prototyping or where fast pot life and demould times are required. Due to the short pot life recommended casting thickness is between 1 - 7 mm , casting thicker may result in bubbles in cast. UV stable.
This firm rubber is excellent for casting decorative objects, prototypes, models, architectural reproductions, duplicate masters, production parts, fixtures, props, tools and more. Poly Plasti-Flex is ideal for casting slightly flexible and impact-resistant parts such as decorative trim, flex molding and millwork as well as for props and display items requiring high impact resistance.
Polyethylene Fibres are used to thicken polyurethane rubbers and plastics for making brushed moulds and shells. Turns a pourable mould rubber or plastic inot a brushable system with any level of thickening desired.