Polycraft FC8000 High Abrasion A80 Polyurethane Casting Rubber

Shake the FC-8000 container thoroughly in order to homogenize the resin. Ensure that both components are at least 20°C before mixing.

FC-8000 part A should be mixed with FC-8000 part B according to the indicated mixing ratio. Both components should be thoroughly mixed, care should be taken to avoid air entrapment and make certain that material at bottom and sides of container is thoroughly stirred into the centre. After thorough mixing, the material should be poured into the mould. To avoid air entrapment, pour the material slowly, and into one place in the mould. In order to obtain a bubble free cast, the material should be degassed after mixing and pouring. Mixing, pouring and degassing must be completed within the stated pot life.

Mix Ratio by Weight 10A: 100B
Pot life 25°C : 35 - 45 Minutes
Demould Time : 16-24 Hours  
Shore A Hardness : 77 ± 82
Cured Colour : Amber
Mixed Viscosity at 25°C : 4000-7000
Tough, High Strength Formula