A two component polyurethane varnish. Use inside and outside above the waterline. Use where a hard, extremely durable and long lasting finish is required. Highly resistant to abrasion and chemicals, for the ultimate finish in durability and beauty. For professional use only.
For Diamond Varnish spray application and tool cleaning use Hempel Thinner 851 (No 6)
Minimum Application Temperature : 5°c
Application Methods :
|Temp ||Touch Dry||Recoat (min/max)||Thinners / Tool Cleaner ||Coverage|
|10°c||16 hrs||32 hrs - 10 days||Thinners No 2 (brush)||12.5 m2/ltr|
|20°c||8 hrs ||16 hrs - 5 days||Thinners No 6 (spray)||12.5 m2/ltr|
Preparation: Always ensure all surfaces are clean, oil free and dry. Clean the surface and remove possible oil and grease with a suitable detergent and sand with dry abrasive paper. It is recommended to apply a suitable wood treatment to new wood before coating.
New wood: Sand and remove all dust. Saturate the dry, clean surface with suitable wood treatment, allow to dry. Plywood: Sand and remove all dust. Seal the dry clean surface with suitable wood sealer.
Previously damaged varnished wood: Wood treatment may be necessary. Previously varnished wood: Abrade, clean and dry the surface.
For further information on technical and safety information please refer to files provided in the technical and safety tab above