|Temp ||Touch Dry ||Recoat (min/max) ||Thinners / Tool Cleaner ||Coverage |
|10°c ||6-8 hrs ||16 hrs - 10 Days ||Thinners No: 2 (Brush) ||16m2/ltr |
|20°c ||3-4 hrs ||8 hrs - 5 Days ||Thinners No: 6 (Spray) ||16m2/ltr |
Available Colours* :
Preparation & Application
Ensure all surfaces are clean, oil free and dry. Cleaning with appropriate cleaner and rinse with fresh water and allow to dry.
Previously Coated Surfaces
Abrade to remove loose matter and provide a suitable key. Remove all dust. Undercoat if necessary. Apply two coats
Previously Uncoated Surfaces
Prime as specified with Light Primer. Apply two coats of PolyGloss. Thinners can be added to assist application under certain conditions.
For further information on technical and safety information please refer to files provided in the technical and safety tab above
The colour's shown should be used as a guide only due to the varying degrees in monitor colour management