Hempel Epoxy Adhesive Glue 750ml
  Zoom

Hempel Epoxy Adhesive Glue 750ml


Price:  £12.50(Inc. 20% VAT)(£10.42 Exc. VAT)Earn 12 Loyalty Points
+

Availability:  

  

7 units

+
Plastic SpreadersPlastic Spreaders
Quick Link Code:  QL1515 Brand:  Hempel
Hempel Epoxy Adhesive is a two-component polyamine adduct cured epoxy glue. Low viscosity and with good penetration properties

Application Methods : 

Temp    PotlifeThinners / Tool Cleaner     Coverage
10°c4 hrsThinners No: 5 10 m2/ltr
20°c2 hrs     Thinners No: 5 10 m2/ltr

SURFACE PREPARATION:

Glass fibre: All loose/defect gel coat must be removed and any absorbed moisture must have evaporated before applying the product. Ferro-cement: Any loose surface layer (e.g. laitance) must be removed by sanding or abrasive sweeping. The moisture content of the concrete must be below 3%. Wood: The wood must be completely dry, moisture content below 16%, and should not be primed with any ordinary priming oils or commercial antimould fluids. Only copper napthenate based impregnating fluid can be used. Let it dry minimum 24 hours (20°C/68°F). As a general rule, the surface must be clean, free from rust, dirt, loose matter, oil, grease etc. Porous, absorbing surfaces should be sealed with Hempel Sealer 599 or with Hempel epoxy adhesive diluted approximately 50% with Hempel Thinner No 5 

APPLICATION CONDITIONS:

The surface must be completely clean and dry at the time of application and its temperature must be above the dew point to avoid condensation. Use only where application and curing can proceed at temperatures above: 10°C/50°F. The temperature of the surface and that of the glue itself must also be above this limit. For porous surface apply the glue on both sides before joining. For deck coverings apply the glue only on the deck surface and allow the glue to be tacky before mounting. In other cases the glued parts have to be held tightly together for 24 hours at 20°C/68°F, 48 hours at 10°C/50°F. Any surplus of the glue must be removed immediately by using Hempel Thinner No 5

For further information on technical and safety information please refer to files provided in the technical and safety tab above

 

 

Be the first to Write a Review for this item!

 

Same day despatch

On order placed before 1pm
Monday to Friday

More info
 

Quantity & volume calculator

Get the right quantity every order

More info
Related Products
Plastic Spreaders

Plastic Spreaders£0.50  -  £200.00

call us now: 028 90 861992 mon-thu 8:30AM - 5:00PM , fri 8:30AM - 3:30PM
0 items - £0.00