Polycraft FC100 (White) Fast Cast Paintable Polyurethane Liquid Plastic Casting Resin System
  Zoom
Size: 500g Kit (250g Part A & 250g Part B)Size: 1kg Kit (500g Part A & 500g Part B)Size: 2kg Kit (1kg Part A & 1kg Part B)Size: 4kg Kit (2kg Part A & 2kg Part B)Size: 10kg Kit (5kg Part A & 5kg Part B)
Size: 20kg Kit (10kg Part A & 10kg Part B)Size: 30kg Kit (15kg Part A & 15kg Part B)Size: 40kg Kit (20kg Part A & 20kg Part B)Size: 50kg Kit (25kg Part A & 25kg Part B)Size: 100kg Kit (50kg Part A & 50kg Part B)

Polycraft FC100 (White) Fast Cast Paintable Polyurethane Liquid Plastic Casting Resin System


Price:  £10.00(Inc. 20% VAT)(£8.33 Exc. VAT)
Earn 10 Loyalty Points
Quick Link Code:  QL6771
+
+

Choose option(s):

Size:  








Polycraft FastCast 100 is an unfilled fast setting polyurethane resin system. Exhibiting excellent flow-ability, short demould times, low shrinkage, good dimensional stability, detail reproduction and good machining qualities. Used for casting master and core models, negatives and general small mouldings. Used in a wide variety of industries from Art, Craft, Engineering, Film & TV, Pattern Making and more.

Applications include : Patterns, Negatives, Castings, Models, Vacuum forming tools, prototypes etc.

FC 100 White Unit
Mix Ratio by Weight 1A : 1B
Pot Life 200g @ 25°c 2 - 2.5 mins
Demould Time 20 mins
Shore D D70
Heat Distortion Temp 75 ± 3 °C
Viscosity at 25°c Mixed 30 ± 5
Cured Colour White

Each kit will come with the same weight in each container, both part A and B are different volumes, therefore the resin must be measured by equal weights, shake well before use.

Before use, be sure that Parts A and B are at room temperature and tools and moulds or models are ready to go. Surfaces and air temperature should be above 60°F during application and for the entire curing period. Use metal or plastic mixing vessels and spatulas to avoid introducing moisture (i.e.., with paper or wood tools). Measure equal weights of part A and part B into a mixing container such as a polyethylene pail. Mix immediately, thoroughly scraping sides and bottom for one minute. Pour mix into mould cavity. Once the containers of Parts A and B are opened, they should be used or resealed tightly as atmospheric moisture contamination may cause foaming of the plastic.

This polyurethane system is recommended over polytek polyurethane if you plan to paint your cast part, plastic primer base coat is advised.

 

Please note: Mandatory training for industrial and professional users is required by 24th August 2023 - Mandatory Training - Click here for details

Be the first to Write a Review for this item!

 

Same day despatch

On order placed before 1pm
Monday to Friday

More info
 

Quantity & volume calculator

Get the right quantity every order

More info
call us now: 028 90 861992 mon-thu 8:30AM - 5:00PM , fri 8:30AM - 3:30PM
0 items - £0.00