AMPRO™ BIO / BIO-BASED EPOXY MULTIPURPOSE SYSTEM
- For bonding, laminating & filling wood & GRP
- Accredited 40-60% bio-based system
- 3 : 1 mix ratio by volume
- Available with Fast, Slow and Extra-slow hardeners
- No surface residue after cure
AMPRO™ BIO is a simple to use, all-purpose epoxy which can be used for gluing, coating, laminating and filling. With its fast, low temperature curing hardener and easy 3:1 mix ratio by volume, AMPRO™ BIO provides a quick and convenient way of using one epoxy system for a very wide range of tasks.
AMPRO™ BIO has been built on the well-established SP 106 which has been the primary epoxy system for the manufacture and repair of wooden boats for over 20 years.
By using the Gurit range of filler powders, an AMPRO™ BIO resin and hardener mix can be turned into a very effective adhesive or filling compound. Details of this filler range, and how to use them, are contained in a separate information sheet (Filler Guide) and typical filling and fairing mixes (resin / hardener / filler) are shown in this data sheet.
|Ampro Resin (20°C) ||Slow Hardener (20°C) ||Fast Hardener (20°C) |
|Mix Ratio By Volume ||3 : 1 ||3 : 1 |
|Pot Life ||43 mins ||23 mins |
|Thin Film Gel Time ||1 hr 54 mins ||1 hr 19 mins |
|Tack Off Time ||4 hrs 30 mins ||2 hrs 40 mins |
|Coating / Sand Time ||20 hrs ||16 hrs |
|Colour - Mixed ||Amber ||Amber |
|Density - Mixed (g/cm3) ||1.09 ||1.07 |
|Viscosity - Mixed ||1100 cP ||1260 cP |
Resins and hardeners use universal containers for various kit sizes and are supplied by weight, while the supplied containers may not be full, they will contain the correct amount of both resin and hardener according to the listing. At point of packaging and dispatch lids may be taped to prevent damage or spillage during transportation.