AMPRO™ CLR HIGH CLARITY CLEAR EPOXY MULTIPURPOSE RESIN SYSTEM
- Ideal for clear coating applications
- SP 320 re-engineered, with improved health & safety
- 3 : 1 mix ratio by volume
- Available with Fast, Slow and Extra-slow hardeners
- No surface residue after cure
- Can also be used for bonding, laminating & filling wood & GRP
AMPRO™ CLR is a simple to use, all-purpose epoxy ideal for coating applications which can also be used for gluing, laminating and filling. With its fast, low temperature curing hardener and easy 3:1 mix ratio by volume, AMPRO™ CLR provides a quick and convenient way of using one epoxy system for a very wide range of tasks.
AMPRO™ CLR hardeners have been developed based on the well-established SP 320 and SP 115 systems which has been the primary epoxy clear coating systems for the manufacture and repair of wooden boats for over 20 years.
By using the Gurit range of filler powders, an AMPRO™ CLR Fast Hardener mix can be turned into a very effective adhesive or filling compound. Details of this filler range, and how to use them, are contained in a separate information sheet (Filler Guide) and typical filling and fairing mixes (resin / hardener / filler) are shown in this data sheet.
Ampro Resin (20°C) | Slow Hardener (20°C) | Fast Hardener (20°C) |
Mix Ratio By Volume | 3 : 1 | 3 : 1 |
Pot Life | 1 hr 15 mins | 28 mins |
Thin Film Gel Time | 2 hrs 21 mins | 1 hr 33 mins |
Tack Off Time | 4 hrs | 2 hrs 50 mins |
Coating / Sand Time | 16 hrs | 12 hrs |
Colour - Mixed | Clear | Clear |
Density - Mixed (g/cm3) | 1.12 | 1.13 |
Viscosity - Mixed | 740 cP | 970 cP |
Resins and hardeners use universal containers for various kit sizes and are supplied by weight, while the supplied containers may not be full, they will contain the correct amount of both resin and hardener according to the listing. At point of packaging and dispatch lids may be taped to prevent damage or spillage during transportation.