As an addition to the final application of laminate, in order to avoid oxygen inhibition of polyester resins and to obtain a tack-free surface.
FC20H must not be added to any resin system that is subject to subsequent lamination or bonding, as interlaminate adhesion may be poor. Where further covering of a waxed surface
cannot be avoided, the surface must be fully abraded before application
Addition levels of FC20H of between 5-7% should be used to obtain tack-free surfaces.
Properties of FC20H Wax Solution
Wax level - 2%
Monomer - Styrene
Monomer Content - 98%
Flash Point - 31.5°C
Stability - 3 months