A single component primer and tiecoat for use below the waterline. Formulated for use with white and light coloured antifoulings. Fast drying with excellent waterproofing properties. Can be applied directly onto a prepared or primed hull before antifouling. Also for use as a tiecoat between an existing and new antifouling.
Minimum Application Temperature : 5°c
Application Methods :
|Temp ||Touch Dry ||Recoat (min/max) ||Thinners / Tool Cleaner ||Coverage |
|10°c ||3 hrs ||6 hrs - indefinite ||Thinners No: 1 (Brush) ||8 m2/ltr |
|20°c ||1 hrs ||3 hrs - indefinite ||Thinners No: 1 (Spray) ||8 m2/ltr |
Available Colours* :
Preparation & Application
Ensure all surfaces are clean, oil free and dry. Cleaning with appropriate cleaner and rinse with fresh water and allow to dry.
Previously Coated Surfaces
Abrade to remove loose matter and provide a suitable key. Remove all dust. Prime with Hempel Primer Undercoat then apply 2 coats of Multicoat or as required.
Previously Uncoated Surfaces
Prepare and prime with Multicoat or appropriate primer. Once Primed apply 2 coats of Multicoat or as required. Multicoat can be used as a primer when thinned at 5-10% with appropriate thinners.
Colour stability: Final colour develops after 1 week immersion in water. Length of service may have a certain influence on colour. The antifouling may obtain a copper-green tinge
For further information on technical and safety information please refer to files provided in the technical and safety tab above
The colour's shown should be used as a guide only due to the varying degrees in monitor colour management