Polycraft SG2000 Paintable Fast Cast Polyurethane Liquid Plastic Casting Resin
  Zoom
Size: 500g Kit (250g Part A & 250g Part B)Size: 1kg Kit (500g Part A & 500g Part B)Size: 2kg Kit (1kg Part A & 1kg Part B)Size: 4kg Kit (2kg Part A & 2kg Part B)Size: 10kg Kit (5kg Part A & 5kg Part B)
Size: 20kg Kit (10kg Part A & 10kg Part B)Size: 30kg Kit (15kg Part A & 15kg Part B)Size: 40kg Kit (20kg Part A & 20kg Part B)Size: 50kg Kit (25kg Part A & 25kg Part B)Size: 100kg Kit (50kg Part A & 50kg Part B)

Polycraft SG2000 Paintable Fast Cast Polyurethane Liquid Plastic Casting Resin


Price:  £9.00(Inc. 20% VAT)(£7.50 Exc. VAT)
Earn 9 Loyalty Points
Quick Link Code:  QL6012
+
+

Choose option(s):

Size:  








Polycraft SG2000 Paintable Fast Cast Polyurethane Liquid Plastic Casting Resin - Cured SamplePolycraft SG2000 Paintable Fast Cast Polyurethane Liquid Plastic Casting Resin - Cured Sample

Applications include : Patterns, Negatives, Castings, Models, Vacuum forming tools, prototypes etc.

SG2000 Unit
Mix Ratio 1A : 1B
Pot Life 200g @ 20°c 2.5 - 3.5 mins
Demould Time 30 mins - 1 hr
Shore D D72
Heat Resistance 86±3 °C
Viscosity at 25°c Mixed 50±5
Cured Colour White / Off White

Each kit will come with the same weight in each container, but part A comes with a filler powder additive, therefore increases the volume, both part A and B are different volumes, therefore the resin must be measured by equal weights, shake well before use.

Before use, be sure that Parts A and B are at room temperature and tools and moulds or models are ready to go. Surfaces and air temperature should be above 60°F during application and for the entire curing period. Use metal or plastic mixing vessels and spatulas to avoid introducing moisture (i.e.., with paper or wood tools).
Measure equal weights of part A and part B into a mixing container such as a polyethylene pail. Mix immediately, thoroughly scraping sides and bottom for one minute. Pour mix into mould cavity. Once the containers of Parts A and B are opened, they should be used or resealed tightly as atmospheric moisture contamination may cause foaming of the plastic.

This polyurethane system is recommended over polytek polyurethane if you plan to paint your cast part, plastic primer base coat is advised.

 

Please note: Mandatory training for industrial and professional users is required by 24th August 2023 - Mandatory Training - Click here for details

Average Rating (5 Reviews):  
Write a Review and share your opinions!

Rating:  
Just what a model maker needs!!
20 February 2020  | 

Great product, produces a fantastic cast surface which is great for priming and painting. Really easy to use with simple instructions.

Was this helpful to you?  Yes  /  No

1 of 1 people found this review helpful.


Rating:  
Amazing sg2000
23 November 2019  | 

I was youse SG2000 first time and I'm so happy to use simple to make and happy saga results

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Best iv`e used
04 September 2014  | 

This resin is by far the best i have used,clean,quick, mess free,fast curing,very easy to sand and paint,never had a problem well worth the cost,very fast postage 100% service from the team.
Thanks to all at MBFG....

Was this helpful to you?  Yes  /  No

23 of 36 people found this review helpful.


Rating:  
Great low odour resin
02 October 2013  | 

Had previously been using polyester casting resin, although this is more expensive it has much less fumes and a much faster turn around time.

Was this helpful to you?  Yes  /  No

25 of 48 people found this review helpful.


Rating:  
Super Fast Curing with great detail
01 May 2013  | 

Amazed at how quickly I was able to demould.

Was this helpful to you?  Yes  /  No

24 of 31 people found this review helpful.

 

Same day despatch

On order placed before 1pm
Monday to Friday

More info
 

Quantity & volume calculator

Get the right quantity every order

More info
call us now: 028 90 861992 mon-thu 8:30AM - 5:00PM , fri 8:30AM - 3:30PM
0 items - £0.00