Visa, Visa Delta, Visa Electron, MasterCard, Maestro, Solo



Hempel Epoxy Adhesive Glue 750ml

Hempel Epoxy Adhesive Glue 750ml
Zoom  Zoom
Our Price:  £12.00(Inc. 20% VAT)(£10.00 Exc. VAT)Earn 12 Loyalty Points

Quick Link Code:  1515
Brand:  Hempel


In stock  

In stock

Plastic SpreadersPlastic Spreaders

*Image(s) For Illustration Purpose Only

Hempel Epoxy Adhesive is a two-component polyamine adduct cured epoxy glue. Low viscosity and with good penetration properties

Application Methods : 

Temp     Potlife Thinners / Tool Cleaner      Coverage
10°c 4 hrs Thinners No: 5  10 m2/ltr
20°c 2 hrs      Thinners No: 5  10 m2/ltr


Glass fibre: All loose/defect gel coat must be removed and any absorbed moisture must have evaporated before applying the product. Ferro-cement: Any loose surface layer (e.g. laitance) must be removed by sanding or abrasive sweeping. The moisture content of the concrete must be below 3%. Wood: The wood must be completely dry, moisture content below 16%, and should not be primed with any ordinary priming oils or commercial antimould fluids. Only copper napthenate based impregnating fluid can be used. Let it dry minimum 24 hours (20°C/68°F). As a general rule, the surface must be clean, free from rust, dirt, loose matter, oil, grease etc. Porous, absorbing surfaces should be sealed with Hempel Sealer 599 or with Hempel epoxy adhesive diluted approximately 50% with Hempel Thinner No 5 


The surface must be completely clean and dry at the time of application and its temperature must be above the dew point to avoid condensation. Use only where application and curing can proceed at temperatures above: 10°C/50°F. The temperature of the surface and that of the glue itself must also be above this limit. For porous surface apply the glue on both sides before joining. For deck coverings apply the glue only on the deck surface and allow the glue to be tacky before mounting. In other cases the glued parts have to be held tightly together for 24 hours at 20°C/68°F, 48 hours at 10°C/50°F. Any surplus of the glue must be removed immediately by using Hempel Thinner No 5

For further information on technical and safety information please refer to files provided in the technical and safety tab above



Be the first to Write a Review for this item!

Plastic Spreaders

Plastic Spreaders£0.50  -  £200.00

Customers who bought this item also bought:

Continue ShoppingTell a Friend