This accelerator is a 1% solution of cobalt soap disolved in styrene, recomended addition levels are between 0.5% and 2.0%
Most polyester resins are now available pre-accelerated but some still require separate accelerator addition. This accelerator my be used to speed up the cure time. Add a small amount of accelerator to pre-accelerated resin. Ensure that you mix the accelerator BEFORE you add catalyst.
Accelerator might react violently with organic peroxides. It is therefore essential that you never bring the accelerator in direct contact with catalyst, this can lead to fire or explosion. Always store and transport accelerator separately from catalyst.
Please refer to technical and safety data sheets before use.